70Ω Impedance MMCX RF Connector , Coaxial Cable Rf Connector PCB
Mount
Product Description :
RF coaxial micro-miniature MMCX PCB connectors are designed with a 50 ohm characteristic
impedance. The working frequency is up to 6 GHz. The reliable
snap-on mating design offers "low RF-leakage." Also, the small
dimensions allow you to use the connectors where space requirements
are critical.
The major application for MMCX connectors are PCMCIA cards & other small hand-held communication
devices.
Applications:
- PCMCIA Cards
- Wireless Application
- Antennas
- Wireless LANs
- Broadband Communications
- Instrumentation RF Test Ports
- Cellular Telephones
- Global Positioning Systems ( GPS )
- Base Stations
- Radio Boards
- Satellite Reception Terminals
Product Specification :
| 1)Material/Plating |
| Material | Plating |
| Connector Body | Brass per(QQ-B-626) | Nickel or gold plating |
| Center contact male | Brass per(QQ-B-626) | Gold plating |
| Center contact female | Beryllium copper per(QQ-C-530) or | Gold plating |
| Phosphor bronze per (QQ-B-750) | | |
| Insulator | PTFE or P.P. | |
| Crimp ferrule | Annealed copper | Nickel or gold plating |
| Gasket | Silicone rubber | |
| 2)Electrical |
| Nominal impedance | 50Ω |
| Frequency range | 0-4 GHz |
| VSWR | 1.3 MAX straight connector |
| 1.5 MAX R/A connector | | |
| Working voltage | 500 Volts rms |
| Dielectric withstanding voltage | 1500 volts rms |
| Insulation resistance | 5000MΩ min |
| Contact resistance | Center conductor 4.0mΩ |
| Out conductor 1.5mΩ |
| 3)Mechanical&Environmental |
| Mating | Bayonet Lock Coupling | | |
| Cable retention | 40 lbs typical | | |
| Durability | 500 cycles | | |
| Coupling nut retention | 50 lbs | | |
| Temperature range | PTFE -55°C to + 155°C, P.P. -45°C to +85°C | | |
About us :
1. We specialize in RF connectors , RF cable assembly and RF
connectors . The main products we manufacture are RF connectors,
MCX , MMCX , SMA , SMB , N , RF connector cable Our products are
sold to different areas of overseas markets .
2. We have passed ISO9001 quality certification and our products
antenna connector comply with RoHS requirement .
3. We have professional technical development team . we have
advanced NC processing equipment and precise test equipment .
4. Our principle is to meet customers’ requirement by good service
and high-quality products . The prices of products….. are very
competitive and reasonable .
5. We are committed to providing the best products….. to our
customers with quickest delivery and best price .
Quality is essential to both of us, we believe that High quality,
Low price,Mutual benefit will be good basis of our cooperation!!!
